adjusting pin meaning in Chinese
调整销
改针
固定销
配合销
校正针
Examples
- Adjust the amount of oil supplied to the thread take up and needle bar crank 3 by turning adjust pin 4
调整挑线杆和针杆曲轴部3的油量时，转动油量调整销4进行调整。 - The minimum amount of oil is reached when marker dot a is brought close to needle bar crank 3 by turning the adjust pin in direction b
调详销刻点a从图的位置向b方向转动，转动到接近针杆曲轴3时，油量最小。 - The maximum amount of oil is reached when marker dot a is brought to the position just opposite from the needle bar crank 3 by turning the adjust pin in direction c
从图上所示的位置向c方向转动，当转到与针杆曲轴3的正对面的位置时，油量为最大。 - Make the sewing machine run idle for approximately 30 seconds after adjusting with the adjust pin , insert a sheet of paper for confirming the oil amount ( oil spots ) from the direction of arrow mark , and confirm that the amount of oil is adequate
用油量调节销调整后，请进行30秒左右的空运转，按照箭头方向插入确认油量(油迹)专用纸确认油量是否适量。